New Products

High-Efficiency, Non-Isolated, Fixed Ratio, 300W, Digital DC/DC Power Module

1.2MHz, Synchronous, 2.75 to 17V, 6A, Ultra-Thin Power Module

7V 6A Step-Down Power Module

Fully-Integrated 802.3af/at Compliant PoE PD Interface with High Efficiency Flyback/Forward Controller

16V, 15A, Synchronous, Step-Down Converter with Adjustable Current Limit, Programmable Frequency, and Voltage Tracking

16V, 20A, Synchronous, Step-Down Converter with Adjustable Current Limit, Programmable Frequency, and Voltage Tracking

Single-String, 3V V_IN-MIN, 36V V_OUT Boost LED Driver, AEC1-Q100

Single-String, 3V Minimum V_IN, 36V V_OUT, Boost LED Driver

Hot-Swap Controller and Energy Monitor with PMBus Interface

60V, 15A, 7mΩ R_DS(ON) Hot-Swap Intelli-Fuse Solution

6V, 2A, Low Quiescent Current, Dual, Synchronous Buck Regulator

Intelli-PhaseTM Solution (Integrated HS/LS-FETs and Driver) in 5mmx6mm LGA

16V, 3A, 600kHz, High-Efficiency, Synchronous, Step-Down Converter with 0.6V V_REF in a SOT563 Package

Multi-Mode PFC and Current Mode LLC Digital Combo Controller Configurable through UART Interface

Enhanced LLC Controller with Robust Adaptive Dead-Time Adjustment and Capacitive Mode Protection

Multi-Mode PFC and Current Mode LLC Controller With Programmable Audible Noise Reduction Control

Enhanced LLC Controller with Robust Adaptive Dead-Time Adjustment

CCM/DCM Flyback Ideal Diode with Integrated 100V/17mΩ MOSFET with Slew Rate Detection

CCM/DCM Flyback Ideal Diode with Integrated 100V/14mΩ MOSFET with Slew Rate Detection

Fast Turn-Off, Dual-Channel Intelligent Rectifier with Adaptive Forward Regulation Voltage and Ultra-Low Sleep Mode Current

Fast Turn-Off Intelligent Rectifier with No Auxiliary Winding Requirement

CrM/DCM Multi-Mode PFC Controller with Enhanced Light-Load Efficiency

18V, 2 x 15W Stereo BTL, Fixed-Frequency, Inductorless Class-D Audio Amplifier

36V, 3.5A, Low I_Q,Synchronous Step-Down Converter

36V, 1A, Low I_Q, Synchronous Step-Down Converter AEC-Q100 Qualified

36V, 3.5A, Low I_Q, Synchronous Step-Down Converter AEC-Q100 Qualified

36V, 2A, Low I_Q, Step-Down Converter

36V, 2A, Low I_Q, Step-Down Converter AEC-Q100 Qualified

36V, 3A, Low I_Q, Step-Down Converter

36V, 3A, Low I_Q, Step-Down Converter AEC-Q100 Qualified

36V, 1A, Low I_Q, Synchronous Step-Down Converter

42V, 1.2A Buck-Boost or 3A Buck Synchronous LED Driver, AEC-Q100 Qualified

36V, 5A, Four-Switch, Synchronous Buck-Boost Converter with I2C Interface AEC-Q100 Qualified

USB PD Controller, Provider Only for Automotive, AEC-Q100 Qualified

36V, 3A Dual Buck Converter with I2C Interface for Automotive Power Delivery, AEC-Q100

45V, 6A, Low I_Q, Synchronous Step-Down Converter

Intelli-PhaseTM Solution (Integrated HS/LS-FETs and Driver) in 5mmx6mm LGA

Single Cell 4.5A Fast Charger with NVDC Power Path, OTG, and Integrated ADC

2s to 10s Stacked Cells Battery Pack Fuel Gauge with Level LEDs

5-20V USB PD 2-cell 6A Dual-phase NVDC Buck-Boost Charger with Integrated FETs and OTG 

36V 3A Switching Charger with Integrated MOSFETs and Power Path Management for 1-6 Cell Batteries

2-cell 2A Boost Charger with NVDC Power Path and Integrated Cell Balancing

2.1A, 1- or 2-Cell Li-ion Battery Charger with 25mohm Rsns

35V, 2.5A Stepper Motor Driver with Internal Current Sense and Latch-off

5.4V to 28V, 5A, H-Bridge Motor Driver

35V, 1.5A Stepper Motor Driver with Internal Current Sense and Latch-off

22V, 2A, Three-Phase Power Stage with ENBL & PWM Inputs

22V, 2A, Three-Phase Power Stage with HS and LS Inputs

22V, 2A, Three-Phase Power Stage with Hall-Signal Inputs

12V, 2A, Three-Phase Power Stage with ENBL & PWM Inputs

12V, 2A, Three-Phase Power Stage with HS and LS Inputs

12V, 2A, Three-Phase Power Stage with Hall-Signal Inputs

Low-Power Angle Sensor with Integrated Wakeup and Interrupt Logic

28V, 5A, H-Bridge Motor Driver Evaluation Board

I²C-Controlled, 3A, Single-Cell USB/Adapter Charger with NVDC Power Path Management and USB OTG

Wide-Input, 4.5A, I2C-Controlled SW Charger w/ NVDC Power Path and USB OTG Eval Board

The EVKT-MP2731 is an evaluation kit for the MP2731, a standalone switching charger with integrated USB detection and USB-OTG functionality.

3V to 22V, Three-Phase Brushless DC Motor Driver Evaluation Board

3V to 22V, Three-Phase Brushless DC Motor Driver Evaluation Board

3V to 22V, Three-Phase Brushless DC Motor Driver Evaluation Board

3V to 12V, Three-Phase Brushless DC Motor Driver Evaluation Board

3V to 12V, Three-Phase Brushless DC Motor Driver with Hall Inputs Evaluation Board

3V to 12V, LS & HS Input, Three-Phase Brushless DC Motor Driver Evaluation Board

42V, 3A Synchronous, Buck Mode LED Driver Evaluation Board

6A Buck or Boost Charger with NVDCPower Management and USB OTG for 2 Cells in Series Batteries Evaluation Board

The EVKT-MP2762A is an evaluation kit for the MP2762A, which is 5-20V USB PD 2-cell 6A Dual-phase NVDC Buck-Boost Charger with Integrated FETs and OTG

36V Switching Charger with Power Path Management for 1-Cell to 6-Cell Batteries Evaluation Board

2-Cell boost charger with 2a Charge Current Evaluation Board (For non-Power Path Applications)

The EVKT-MP2672A is an evaluation kit for the MP2672A, which can be controlled by the GUI to charge and discharge 2-cell batteries.

2-cell boost charger EV board with 2a Charge Current and NVDC (For NVDC Power Path Applications)

3A, I²C-Controlled SW Charger with NVDC Power Path and USB OTG Evaluation Board

6V, Dual 2A, Low Quiescent Current SYNC Buck Regulator

The EVREF0105A Evaluation Board is designed to demonstrate the capabilities of MPS’ highest efficiency Power reference design solution for Xilinx Versal ACAP.

2A, 1- or 2-Cell Li-Ion Battery Charger Evaluation Board

600kHz, 3A, 16V, High-Efficiency Step-Down ConverterEvaluation Board